And here are the changes from the last model:
Dylan doesn’t use chain tensioners so we have not used them on this frame. This allowed us to make the dropout smaller since we don’t need the material between the stays for the tensioner.
TAPED TOP AND DOWN TUBES.
With more diameter where you need it. On the head tube junction. And less where you don´t need it, on the bb and seat tube. Also seat tube is slightly taped to save some weight.
HORIZONTAL CUT SEAT CLAMP.
Just tight the bolt a bit and it’s on place. No more broken bolts.
TIERRA STAYS BRIDGES.
Dylan loved the Tierra bridges so here they are.
13.40” REAR END.
Dylan wanted a rear end in-between the traditional 13.75” and the 13.25” so we made it this way.
OTHER DETAILS, WEIGHT AND COLORS
Smooth and rounded head tube and BB tubes CNC machining.
The weight is 2.125grs / 4.6lb. and you have it in purple and white.
We hope you like it!